Beskrivning
The ALto Monitor PA Processor is really efficient for PA monitor. It is based on many years of experience and is designed to provide studio engineer and sound
contractor with a precise equalization. It can be used to modify the frequency ”contour” of a sound, eliminate the unwanted
frequencies and suppress the feedback well.
PA / Monitor EQ / Feedback Eliminator
TECH INFORMATION
An analogue EQ designed for PA and Monitor application
15 – band 2 / 3 Octave Graphic EQ, switchable +/- 6dB or +/- 12dB
Two notch filters to reduce unwanted feedback frequencies, with frequency and cut controls
Lo – pass & Hi – pass 12dB / Oct. filters to reduce unwanted sounds and noises
Balanced Inputs / Outputs XLR & 1 / 4″ TRS jack
Dimensions (WxDxH): 483 x 194.1 x 44mm (19″ x 7.6″ x 1.7″)
Weight: 2.8kg (6.2 lb)
Control range 6dB or 12dB selectable
Bypass function
Switchable Hi – pass and Low – pass filters.
Balanced XLR, 1 / 4″ TRS and RCA input and output connectors
Signal clip LED
Ground ”LIFT” switch to disconnect signal ground from chassis ground
Line voltage selectable (115V / 230V)
Control Range: +/-6dB or 12dB selectable
Inputs and Outputs: XLR, 1 / 4″ TRS and RCA jack
Inputs Impedance: 20K ohm (bal) 15K ohm (unbal)
Outputs Impedance: < 600 ohm
High Pass Filter: 40Hz (12dB/oct)
Low Pass Filter: 16kHz (12dB/oct)
Max. Input Level: +18dBV
Max. Output Level: +16dBV
THD%: 0.02% (at 1kHz, all slider at center)
Frequency Response: 20Hz to 50kHz, 3dB (all slider at center)
S / N Ratio: 117dB
Power Supply: AC 100V – 120V, 60Hz / AC 200V – 240V, 50Hz
Power Consumption: 15 watts (max)
